2005 Chevrolet Tahoe, Viper 4115v and Xpresskit GMDLBP

Home / the12volt's Install Bay / Car Security and Convenience / 2005 Chevrolet Tahoe, Viper 4115v and Xpresskit GMDLBP

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

jet slicker

Member - Posts: 7

Joined: December 19, 2019

Location: Michigan, United States

Posted: December 22, 2019 at 7:28 PM / IP Logged

That's perfect thank you! And then the only wire that goes straight from the INT-SL+ to the vehicle is the purple wire for OBD-II signal?

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 22, 2019 at 8:34 PM / IP Logged

Correct. If you look at the Pictorial, you will see a

Bench Prepped R/S / bypass module system. All the wire

inter-connections are cut to length, soldered and shrink

tubed. Easy work in a heated shop sitting at the bench

with good light. Makes the install quick and easy.

Soldering is fun!

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.