Compustar CM800 Remote Start Starting Itself

Just pulled a compustar CM800 module out of my 2010 forester snd installed it into my 94 accord. The car keeps starting itself within 30 seconds of me shutting the car off. I have the module unhooked for now. All wires have been double checked with a multimeter, and I can’t seem to find the issue. 12v constant, ignition, starter, accessory, parking lights, brake, and tach are hooked up. Ground was made with a ring terminal and self tapper to a metal bracket underneath. Not sure what to do from here. Tried entering and existing valet mode and reprogramming the key fob with no luck.

Check the remote start sequence wires, red/white CN10 (negative input) and red CN11 (positive input). Look for any damage (pinching, exposed bare copper, etc.).My ex once told me I have a perfect face for radio.

Those wires aren’t connected to anything but Will look here

geepherder wrote: Check the remote start sequence wires, red/white CN10 (negative input) and red CN11 (positive input). Look for any damage (pinching, exposed bare copper, etc.).

Looks like its fixed. I took the zip ties off the extra CN2 wires I wasn’t using and the shielding on some did look like it was damaged on a few. Just pulled all the unused pins out and seems to be fine now