Mercedes 300SDL

Home / the12volt's Install Bay / Car Audio / Mercedes 300SDL (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lbikrskatr

Member - Posts: 6

Joined: June 29, 2003

Location: United States

Posted: October 08, 2003 at 12:09 AM / IP Logged

I am trying to remove the factory stereo on a 1987 Mercedes 300 SDL, but after I removed the clips in the front, it only pulled out another 1/2 inch. I would like to know how to remove the entire thing so I can install my old deck.

Any assistance would be helpful

Lounis Zenad

w124

Member - Posts: 4

Joined: October 05, 2003

Posted: October 08, 2003 at 5:26 AM / IP Logged

It's been a whiles since I've done this... but try:

1. Pull up the wood trim around the shifter. Pull up from the rear and disconnect the switches

2. The plastic storage "bin" in front of the shifter should just pull right up

3. Open the ashtray and remove two screws inside it. Remove ashtray.

4. The stereo should now slide out very easily.

lbikrskatr

Member - Posts: 6

Joined: June 29, 2003

Location: United States

Posted: October 08, 2003 at 3:42 PM / IP Logged

thanks, that saved me a lot of time, I was about to start grinding the factory stereo and make it work.

Lounis Zenad

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Mercedes 300SDL

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.