Box building software

Home / the12volt's Install Bay / Car Audio / Box building software (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Geeque

Silver - Posts: 310

Joined: October 07, 2003

Location: United States

Posted: December 28, 2003 at 4:34 PM / IP Logged

Does anyone know of any free box building software? With cut sheets? Volume calculators using thiele small parameters.

Gary Kline

MECP Master Technician

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: December 28, 2003 at 4:36 PM / IP Logged

Winisd but dosent have box cut sheets, but it has many subs already stored in it's database is a helpful tool, the only one that has cut pram's thought is blublux you can find them both free online

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Geeque

Silver - Posts: 310

Joined: October 07, 2003

Location: United States

Posted: December 28, 2003 at 5:01 PM / IP Logged

whats the address

Gary Kline

MECP Master Technician

carguy411

Silver - Posts: 683

Joined: April 02, 2002

Location: United States

Posted: December 28, 2003 at 5:32 PM / IP Logged

are u sure that u spelled the blublux software right i cant find it under any of the searches??

please let u sknow

thanks

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: December 28, 2003 at 7:40 PM / IP Logged

i havent used it for awhile so i dont know if the spelling is right you used to be albe to get it off this site, so i dont know what to tell you look around on here for it, the WINISD is fairly easy to use but you have to draw up your own cuts and demisions it will give you port lengths and approx spl output and such

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Durwood

Copper - Posts: 126

Joined: November 30, 2003

Location: United States

Posted: December 28, 2003 at 9:40 PM / IP Logged

carguy411 wrote:

are u sure that u spelled the blublux software right i cant find it under any of the searches??

please let u sknow

thanks

I've never heard of "blublux", but that sounds suspiciously close to "Blaubox", an old DOS program developed by Blaupunkt in the early 90's that I believe gives cut dimensions for the required pieces. The good news it that it's available free here:

http://tinyurl.com/ytga8

The bad news is I can't get it to run under Windows XP. The program keeps spontaneously re-starting. I'll play around with the DOS settings and if I can get it to work reliably, I'll post my results here.

Scott Gardner

Durwood

Copper - Posts: 126

Joined: November 30, 2003

Location: United States

Posted: December 28, 2003 at 10:10 PM / IP Logged

Well, here's an update. I booted up my computer with an old DOS 6.22 boot disk, and Blaubox is doing the same thing. I thought it might be a piece of hardware in my computer, so I tried it on my wife's computer - same thing. You can get to the main menu, or maybe a little further, then the program re-starts itself.

It's really a pretty good program from what I remember, so if you have an old P.O.S. 286 or 386 computer lying around, it might be worth it to try it out.

Scott Gardner

carguy411

Silver - Posts: 683

Joined: April 02, 2002

Location: United States

Posted: December 28, 2003 at 11:59 PM / IP Logged

damn theres no other programs we can use or something easy and not complicated

thanks

Geeque

Silver - Posts: 310

Joined: October 07, 2003

Location: United States

Posted: December 29, 2003 at 12:09 AM / IP Logged

thanks for trying i have a treo csx 15.22 &a treo csx 18.22 and unfortunately they dont have c.f i have all the specs but no c.f if anyone can go on treos website www.treoonline.com and check it out and give me ported specs id really appreciate it .Ive built many boxes ,and they sounded incredible but none to absolute spec .

Gary Kline

MECP Master Technician

Durwood

Copper - Posts: 126

Joined: November 30, 2003

Location: United States

Posted: December 29, 2003 at 3:30 AM / IP Logged

carguy411 wrote:

damn theres no other programs we can use or something easy and not complicated

thanks

Oh, I'm sure there are other programs you can use. I only put a little effort into trying to get Blaubox to work because it fit his needs - small, available for free download, and it generates cut-sheet dimensions for the box.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.