need wiring diagram 93 accord exr alarm install

|              12V|white               |+  |ignition harness            |

|          STARTER|BLACK/ white         |+  |ignition harness            ||         IGNITION|BLACK / YELLOW        |+  |ignition harness            ||        ACCESSORY|yellow              |+  |ignition harness            ||       POWER LOCK|BLACK/ white *1      |-  |lower drivers kick *2       ||     POWER UNLOCK|BLACK/ red *1        |-  |lower drivers kick *2       || PARKING LIGHTS +|RED / black           |   |fuse box in dr. kick        ||       HEADLIGHTS|blue/red or blue    |-  |steering column             ||     DOOR TRIGGER|BLACK/ white         |-  |left of column *3           ||  TRUNK/HATCH PIN|GREEN/ black         |-  |left of column *4           ||         HOOD PIN|                    |   |                            ||TRNK/HTCH RELEASE|                    |   |                            ||  FCTRY ALARM ARM|                    |   |                            ||FCTRY ALRM DISARM|                    |   |                            ||       TACHOMETER|blue                |   |distributor                 ||       BRAKE WIRE|GREEN / WHITE         |+  |at brake switch             ||     HORN TRIGGER|lt. GREEN/ blue *5   |-  |column or horn relay        ||           WIPERS|                    |   |                            ||  LF WINDOW UP/DN|RED / yel - RED / blue  |A  |drivers door switch         ||  RF WINDOW UP/DN|blu/grn - blu/yel   |A  |in drivers door or dkp      ||  LR WINDOW UP/DN|green - grn/yel     |A  |in drivers door or dkp      ||  RR WINDOW UP/DN|yel/grn - yellow    |A  |in drivers door or dkp      |

Notes:

*1 The station wagon uses GREEN / WHITE for lock and yellow/white for unlock.  These wires are found either in the drivers door harness or under the rear seat.  *2 Locate the large harness in the lower below the carpet in the drivers kick panel.  Near the foot rest you will notice a piece of blue tape attached to the harness itself.  Reach around to the underside of the blue tape to locate a 2 pin gray plug with the lock and unlock wires attached to the plug.    *3 Located in a brown plug.  *4 Located in a green plug.  *5 High-current ground.  Use a relay when interfacing with this circuit.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA