Removing Door Panel on 95 Chev Pickup

Home / the12volt's Install Bay / Car Audio / Removing Door Panel on 95 Chev Pickup (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Bls_15

Member - Posts: 1

Joined: December 11, 2004

Posted: December 11, 2004 at 6:38 PM / IP Logged

Anyone know the "correct" way to remove the panel?

kfr01

Gold - Posts: 2,121

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 30, 2003

Posted: December 11, 2004 at 6:50 PM / IP Logged

With care. I've found that this: http://www.crutchfield.com/S-DBdSebbVuxd/cgi-bin/ProdView.asp?i=18187650 door removal tool really helps.

1) Find and unfasten all the screws

2) Pop up the panel using that tool or another small lever near the clip points

3) With the door loose look inside the panel for places where wires / door lock bar is connected

4) Taking care not to break any of that stuff, take the wires and door locking bar off the plastic panel

If you're still unsure, crutchfield sells mastersheets, showing where all the fasteners and clips are for like $4.00, if I remember correctly.

New Project: 2003 Pathfinder

customsuburb

Gold - Posts: 1,813

Joined: January 17, 2004

Location: United States

Posted: December 11, 2004 at 9:11 PM / IP Logged

Bls_15 you have a Private Message (PM).

You have to remove the screw in the door "armrest cup", remove the sail panel (held on very tightly with a retaining clip), pry up the power windows and door lock panel (pry up at the rear and pull towards the rear also, the rear as in towards the rear of the vehicle), THEN you can start using the door removal tool (a puttyy knife in my case) to release the retaining clips on the side and and bottom of the door. After you have made sure all clips are taken off, slide the panel upwards off the window channel. Thats about it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Removing Door Panel on 95 Chev Pickup

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.