'02 Elantra Alarm Disarm?

Home / the12volt's Install Bay / Car Security and Convenience / '02 Elantra Alarm Disarm? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

radsta

Member - Posts: 42

Joined: October 18, 2002

Location: United States

Posted: October 18, 2002 at 9:54 AM / IP Logged

I installed the aps-685 remote start with keyless entry- easy car. The problem is i couldn't disarm the factory alarm without the transmitter. Anyone know how to disarm this thing from an aftermarket unit? Thanks for any information.

victor

Back to Top

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: October 18, 2002 at 4:39 PM / IP Logged

its a pain what i did was get the factory wires from the switch to the etacs and cut them and wire in your own relays to the lock wires its a real pain .the etacs turns on the alarm if it never sees the signal it cant turn on. unfortuately i dont remember the wire colors and i cant find my notes on the car.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'02 Elantra Alarm Disarm?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.