the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

subwoofer box question.


Post ReplyPost New Topic
< Prev Topic Next Topic >
Texas_4485 
Member - Posts: 3
Member spacespace
Joined: February 27, 2005
Location: United States
Posted: March 05, 2005 at 6:23 PM / IP Logged  

Are you opposed to running a ported box?

Are the speakers going to be run Parrallel, Series or Seperate channels?

If the deminsions that you are giving are the outside with 3/4 MDF then it is two small.

I could help you with the measure ment if you give some measurements of the location you are mounting this box in. The measur ment that I am most interested in is the width.

Texas_4485

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer