2001 mercury villager alarm wiring

Home / the12volt's Install Bay / Car Security and Convenience / 2001 mercury villager alarm wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jscooneys

Member - Posts: 1

Joined: November 18, 2005

Posted: December 16, 2005 at 12:46 PM / IP Logged

hey i work at a car lot and need the wiring for this villager so if anyone can help that would be great

thanx

wokin4alivin

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: December 16, 2005 at 5:17 PM / IP Logged

MERCURY VILLAGER 2001

12volts	WHITE/ red	+	ignition harness
Starter	BLACK / YELLOW	+	ignition harness
Second Starter	BLACK/ green	+	ignition harness
Ignition	BLACK/ white	+	ignition harness
Second Ignition
Third Ignition
Accessory	blue	+	ignition harness
Second Accessory	red	+	ignition harness
Keysense
Power Lock	red	-	either door harness
Power Unlock	RED / black	-	either door harness
Notes: Unlock requires double pulse.
Lock Motor	GREEN/ YELLOW		drivers door harness
Unlock Motor	WHITE/ green		drivers door harness
Parking Lights+	do NOT use
Parking Lights-	gray/red		headlight switch
Hazards
Turn Signal(L)
Turn Signal(R)
Reverse Light
Door Trigger		-
Notes: Low in the drivers kick find red for the drivers door and RED / white for the liftgate. In the passengers kick find RED / white for the passenger front door, and RED / green for the sliding doors. Use all trigger wires and diode isolate each.
Dome Supervision	BROWN / white	-	low in drivers kick
Trunk/Hatch Pin	with door trigger
Hood Pin	BLACK/ pink	-	harness behind fuse box
Trunk/Hatch Release
Power Sliding Door
Factory Alarm Arm	arms with lock
Factory Alarm Disarm	disarms with unlock
Disarm No Unlock
Notes: A single pulse on the unlock wire will disarm the factory alarm without unlocking.
Tachometer	white		pin 2 @ PCM
Notes: The PCM is located behind the glove box.
Wait to start
Brake Wire	yellow/black	+	brake pedal switch
Parking Brake
Horn Trigger	lt. blue/black	-	steering column
Memory Seat 1
Memory Seat 2
Memory Seat 3

Interface Module:

Category:

Immobilizer Bypass

Required:

Type:

N/A

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 mercury villager alarm wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.