the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

bypass works on and off


Post ReplyPost New Topic
< Prev Topic Next Topic >
cntrylvr79 
Silver - Posts: 582
Silver spacespace
Joined: July 02, 2005
Location: United States
Posted: February 10, 2006 at 7:51 PM / IP Logged  
If the r/s you put in has a - ignition output for adding extra relays you could use that instead of the ground out while running.
Cause I'm So white and nerdy...
First Class Certi-fried installer
trtex 
Member - Posts: 25
Member spacespace
Joined: January 22, 2006
Location: United States
Posted: February 11, 2006 at 10:58 PM / IP Logged  
tied a relay to the ignition wire from the remote start and used that to ground out the bypass...works great!!!
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, September 21, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer