Compustar ignition and relay

Home / the12volt's Install Bay / Car Security and Convenience / Compustar ignition and relay (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

muststart

Member - Posts: 6

Joined: December 31, 2005

Location: United States

Posted: January 28, 2006 at 8:03 AM / IP Logged

2000 Toyota 5 speed

Compustar cm4200 comes with relay attached to pin #7 red wire. Do I need this relay? If so do I have to cut ignition wire?

h2oskierfl

Copper - Posts: 87

Joined: April 20, 2005

Location: United States

Posted: January 28, 2006 at 11:27 AM / IP Logged

Im not familiar with the alarm but it sounds like the starter kill relay. if you want this feature, you would have to put this in line with the starter wire.

muststart

Member - Posts: 6

Joined: December 31, 2005

Location: United States

Posted: January 28, 2006 at 12:41 PM / IP Logged

Pin number 7 reads from the installation manual as:(GREEN/ red) this wire is used to power the (+) IGNITION. This wire is also an input for the Compustar used to monitor the status of the vehicle and for programing.

Green wire comes out of connector alone.

Red wire comes out of connector to relay. Relay also has yellow wires to center, and yellow black stripe wire.

Since this is ignition connection do I have to cut ingnition wire at harness plug?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Compustar ignition and relay

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.