2001 Saturn SC2 and DEI 530T

Home / the12volt's Install Bay / Car Security and Convenience / 2001 Saturn SC2 and DEI 530T (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

gakr2000

Member - Posts: 23

Joined: September 10, 2005

Location: United States

Posted: September 02, 2006 at 10:09 PM / IP Logged

Need help with this one. I was told at circuit city that i would need TWO 530T's one for each window. I thought that the 530t was supposed to control two windows up and down? Needless to say i had them install the one i had and it works great on my drivers side. Now i have the second one and was wanting to install it myself (they charge $120.00) but i need some wiring advice/help. Also were they correct in saying that i do in fact need two 530t's one for each window. I thank you all in advance for your help. BTW i have a Viper 791xv

Cameronjc

Member - Posts: 29

Joined: February 06, 2004

Posted: September 02, 2006 at 10:23 PM / IP Logged

Yep, one controls two windows up OR down, or one window up and down.

On the main page of this site, vechicle wiring diagrams are available :)

gakr2000

Member - Posts: 23

Joined: September 10, 2005

Location: United States

Posted: September 02, 2006 at 10:33 PM / IP Logged

See thats what i dont get. I had ONE 530T installed in my old 00' explorer sport and it controlled both drivers and passengers side windows up AND down but on this SC2 it will only control one window? I and wondering why and also some help with wiring this second one to my passengers side. I tried doing a search for my vehicle but i couldnt come up with anything?

Cameronjc

Member - Posts: 29

Joined: February 06, 2004

Posted: September 02, 2006 at 10:38 PM / IP Logged

You know what, you're right. I was confused for a second.. a 530T will control both windows up and down.

gakr2000

Member - Posts: 23

Joined: September 10, 2005

Location: United States

Posted: September 02, 2006 at 10:44 PM / IP Logged

You just confused the 530 with the 529 is all. I searched the main page for the wiring diagram but they do not have my vehicle.

Cameronjc

Member - Posts: 29

Joined: February 06, 2004

Posted: September 02, 2006 at 10:47 PM / IP Logged

Yep I was thinking of the 529.

Let me see what I can come up with for a diagram

gakr2000

Member - Posts: 23

Joined: September 10, 2005

Location: United States

Posted: September 02, 2006 at 10:51 PM / IP Logged

Thanks for the help.

Cameronjc

Member - Posts: 29

Joined: February 06, 2004

Posted: September 02, 2006 at 11:03 PM / IP Logged

MODEL: S Series

YEARS: 2000 - 2002

KEY	T-HARNESS	IMMOBILIZER
N/A	SAT-1	GM's PASSLOCK 2 ANTI-THEFT System, Requires 791 Bypass Module

12 VOLT CONSTANT	RED (+)	IGNITION SWITCH HARNESS
STARTER	YELLOW(+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	PINK(+)	IGNITION SWITCH HARNESS
IGNITION 2	N/A
IGNITION 3	N/A
ACCESSORY /HEATER BLOWER 1	ORANGE (+)	IGNITION SWITCH HARNESS
ACCESSORY /HEATER BLOWER 2	N/A
KEYSENSE	LIGHT GREEN (-) See NOTE *1	IGNITION SWITCH HARNESS
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	BROWN (+)	@ HEADLIGHT SWITCH
POWER LOCK	LIGHT BLUE (TYPE B)	IN DRIVERS KICK PANEL
POWER UNLOCK	WHITE (TYPE B)	IN DRIVERS KICK PANEL
DOOR TRIGGER	See NOTE *2	See NOTE *2
DOMELIGHT SUPERVISION	GRAY/BLACK (-)	See NOTE *2
TRUNK RELEASE	GRAY (+) or BLACK (+)	BEHIND THE FUSEBOX
SLIDING POWER DOOR	N/A
HORN	BLACK (-)	@ STEERING COLUMN HARNESS
TACH	WHITE or ORANGE	@ IGNITION MODULE FRONT OF MOTOR
WAIT TO START LIGHT	N/A
BRAKE	LIGHT BLUE (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	N/A
ANTI-THEFT	YELLOW (+) and BLACK (-) and WHITE (Not Used)	GM's PASSLOCK 2, wires are in Steering Column Harness

EXTRA INFORMATION

NOTE *1 THE LIGHT GREEN(-) KEY SENSE WIRE AT THE STEERING COLUMN MUST SEE A (-) NEGATIVE DURING REMOTE START TO KEEP THE SERVICE ENGINE LIGHT FROM COMING ON. NOTE *2 USE GRAY/BLACK (-) FOR THE DRIVERS DOOR AND LIGHT GREEN/ BLACK (-) FOR THE PASSENGER DOOR(S). THE GRAY/BLACK (-) IS LOCATED NEAR THE DIAGNOSTIC PLUG HARNESS UNDER THE DRIVERS SIDE DASH AND THE LIGHT GREEN/ BLACK (-) IS LOCATED IN A BLACK 24 PIN PLUG BEHIND THE FUSEBOX IN THE CENTER CONSOLE. WHEN CONNECTING TO AN ALARM SYSTEM USE ALL (4) DOOR TRIGGER WIRES AND DIODE ISOLATE, TO CONNECT, SEE DIAGRAM.

gakr2000

Member - Posts: 23

Joined: September 10, 2005

Location: United States

Posted: September 02, 2006 at 11:24 PM / IP Logged

Thanks for that diagram. It seems to have everything except for the window wires. The alarm is already installed i only need to know how to wire the other 530T to my passengers side window. Thanks for that info though.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: September 03, 2006 at 12:25 AM / IP Logged

Don't waste your time wiring in another one. You need to only have (1) 530T in the car. I really wonder how the installer at CC hooked up the first one. He should have had 4 unused wires that could have been used for the passenger side.

This will probably match your car.

LF Window up/dn dk blue up

brown down

Type A switch in center console

RF Window up/dn lt blue up

tan down

Type A switch in center console

You need to look at how the original installer hooked up the 530T...finish the install, then take the extra 530T you have and return it or sell it.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.