need help installing keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / need help installing keyless entry (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bnewsom

Member - Posts: 1

Joined: January 18, 2003

Location: United States

Posted: January 23, 2003 at 6:57 PM / IP Logged

I'm installing a Prestige APS-55 remote start/keyless entry into 1986 Jaguar XJ6. Starter wiring was no prob. but can't get the right diagram for the keyless entry. All diagrams I've come across for this car show relays in kick panels or under glove box which is not how this car is wired. Sure can use some help on this one. Thanks!

bnewsom

Back to Top

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: January 23, 2003 at 11:05 PM / IP Logged

the earliest i have is 1990 and it says under the glovebox. i did an 87 or 88 and found them behind the glovebox as i recall as well as the trunk release.

Back to Top

themagicone

Silver - Posts: 325

Joined: October 01, 2002

Location: United States

Posted: January 24, 2003 at 12:11 AM / IP Logged

1988 *2 Relays located below right side dash. Remove panel to access. Lock module mounted vertically to right of relays. Small black plastic box.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

need help installing keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.