1988-89 Buick Lesabre Security info?

i hooked it all up today, and i couldnt figure out which wires to use for the lock/unlock option... i have the k9 classic alarm if someone needs to pull up to download for the wiring, i used the green (-) for the pin switch and it works on all doors, than i had the purple (+) left over, and i couldnt figure out what else i needed for it... could someone help me with this please, and thanks for t he help alreadyyeaaaaaaaaaaaa!!!

You do not need to use the purple + door trigger input of the alarm, it is provided for cars that supply a positive as opposed to a negative trigger. Your vehicle has a negative trigger dome light so there is no need for the positive trigger input to the system. I do not have a diagram for the K9 Classic alarm, but most systems offer either a negative trigger output for door locks or a reversing transistorized output. If your system has the negative trigger outputs you would use two relays and follow this diagram. This would change the negative outputs to positive and trip the factory relays to lock and unlock the doors. If your system has reversing outputs than you would only need to connect the output wires directly to the factory wiring.

i just cant find the postive door lock/unlock wires... i found the light blue one, than it says somethin like the positive door trigger is where the other wire goes... i got the green wire from my alarm goin to my pin switch than theres the purple left over than the blue which is for the trunk...yeaaaaaaaaaaaa!!!