the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 maxima m/t compustar 2w900fm s


Post ReplyPost New Topic
< Prev Topic Next Topic >
dcman41 
Copper - Posts: 211
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: October 21, 2005
Location: United States
Posted: June 15, 2007 at 6:29 PM / IP Logged  
clutch bypass is cake i usually use the negative status output to send a NEGATIVE signal to the clutch switch since the -negative status output is only used during cranking. THANKS FOR ALL YOUR HELP i really appreciate it!
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: June 15, 2007 at 10:28 PM / IP Logged  

Status output, or ground while running is NOT what you need to use on your clutch. The status out activates before the remote start, stays active durring the remote start time, THEN shuts down after the remote start time. It is typically use dto trigger a bypass module.  Your compustar has negative outputs used for 2nd accs. ign. AND start. Use this instead of the status wire. The clutch need a "start" signal, not a ground while running.

Be carefull.

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, September 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer