the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

grounded rca


Post ReplyPost New Topic
< Prev Topic Next Topic >
menappi 
Member - Posts: 25
Member spacespace
Joined: January 22, 2004
Posted: June 25, 2007 at 4:48 PM / IP Logged  
I ripped apart my interior to add rear speakers and I noticed my front door speakrs that are hooked to an amp are grounded, as in someone slid a piece of wire between the wire and th rca plug on the back of hte deck and stuck them together, then grounded the wire. Why is that, what if i pull it out, I don't get why that was done.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: June 25, 2007 at 5:02 PM / IP Logged  

Sounds like it is a Pioneer radio and it had a common problem with the Shield of the RCA jacks losing it's ground reference.  Try ungrounding the wire, starting your engine and see if it has very loud engine noise.  If so that is why they did it.

menappi 
Member - Posts: 25
Member spacespace
Joined: January 22, 2004
Posted: June 25, 2007 at 10:32 PM / IP Logged  
Tahnks for the response, it's actually a , forgive me if I miss a number, pioneer premier deh-960mp or something like that, it folds down to reveal a pretty screen. Assuming it doesn't have the pro standard thing, would it be ok to.. hook the front speakers to the FRONT rcas, wire my rear speakres to the rear wires on the wiring harness..then..idunno about the tweeters. Woudl those go in line with my front speakers that are hooked to the amp?
menappi 
Member - Posts: 25
Member spacespace
Joined: January 22, 2004
Posted: June 25, 2007 at 10:36 PM / IP Logged  
Whoop sthat post was supposed to go in another topic, but yeah it's a pioneer radio.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: June 26, 2007 at 9:19 AM / IP Logged  
Did you try ungrounding the wire and test for lots of engine noise?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer