polar start ps 2700 install manual

Home / the12volt's Install Bay / Car Security and Convenience / polar start ps 2700 install manual (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

matt_willie

Member - Posts: 3

Joined: September 02, 2004

Posted: September 02, 2004 at 12:12 AM / IP Logged

i'm looking for a install manual for ps-2700. i've presently have it hooked up in a 04 astro cargo van.It turns over and starts then shuts off and continues to crank over.after that when i start it with key the service engine light stays on.any help would be great.

Back to Top

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: September 04, 2004 at 2:49 PM / IP Logged

are you powering all the required ign and acc circuits?.... sounds to me like you are leaving a second ign unpowered

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

matt_willie

Member - Posts: 3

Joined: September 02, 2004

Posted: September 08, 2004 at 6:50 PM / IP Logged

i found a manual and located the correct tach wire. i have set the tach but the van continues to not won't to stay running.do you have to bypass the passlock or not

Back to Top

trogguy

Member - Posts: 1

Joined: September 13, 2004

Location: Canada

Posted: September 13, 2004 at 8:45 PM / IP Logged

Where did you locate a manual for the PS-2700? I was given one from a co-worker and need to get it installed. Any help would be appreciated....

Back to Top

CanadianJimmy

Member - Posts: 1

Joined: October 06, 2004

Location: Canada

Posted: October 13, 2004 at 7:21 AM / IP Logged

Im also looking for the manual for the ps-2700, has anyone found one online ? or does anyone have one that can tell me what wires go where ? It was installed on a 97 jimmy i purchased and all the wires aren't hooked up so Im not sure if it completely installed correctly or not.

One main thing is can someone tell me the correct connection for the little white plug ? the pins it connect to is larger then it. I take it the tappered side of the plug goes against the part of the board that holds it down but where does it go ? top or bottom

Thanks for any help

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

polar start ps 2700 install manual

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.