the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5902 + dball in hyundai 2012


Post ReplyPost New Topic
< Prev Topic Next Topic >
tameros 
Copper - Posts: 75
Copper spacespace
Joined: November 26, 2011
Location: Egypt
Posted: March 10, 2013 at 7:19 AM / IP Logged  
Also jumper 3 is set to ON, and the 516L monitors the (+) siren output of the R/S through the brown wire of the 516L module. Or should i better activate the honk output of the R/S unit and then connect it to the brown wire of the 516L module instead of the R/S (+) siren output?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 10, 2013 at 7:20 AM / IP Logged  
A piece of heartfelt advice or one of my non-PC jokes.
I'll be watching Spurs V Liverpool in about 4 hours, do the same, do NOT go to a local game. Especially don't riot if your team loses. viper 5902 + dball in hyundai 2012 - Page 12 -- posted image.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 10, 2013 at 7:23 AM / IP Logged  
I don't know enough to answer you but if it works on the other sensors, why won't it work on the 508d? Trigger current and voltage should be the same on each.
tameros 
Copper - Posts: 75
Copper spacespace
Joined: November 26, 2011
Location: Egypt
Posted: March 10, 2013 at 8:13 AM / IP Logged  
How can i reboot the 5902?
I have a spoiler with LED connected the harness.
I think there is no problem at all between the the 508d and the 5902 as I get the warn away trigger paged on my HD 2-way remote. I think maybe it is related to the siren output and the monitoring of the 516L to the chirps and the length of the signal as the warn away of the 516L needs a signal shorter than 0.8 sec
tameros 
Copper - Posts: 75
Copper spacespace
Joined: November 26, 2011
Location: Egypt
Posted: March 10, 2013 at 8:15 AM / IP Logged  
and the warn away chirps on the viper but the 516L doesn't play the warn away message
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 10, 2013 at 9:35 AM / IP Logged  
This might be your answer to the brake problem.:-
After your connection to the brake wire add a 1N5404 diode in line with it's band towards the rear, that will prevent any feedback and might cure the problem.
Forget the re boot the problem is with that horrible 516L viper 5902 + dball in hyundai 2012 - Page 12 -- posted image.
I told you to throw it away!!!
tameros 
Copper - Posts: 75
Copper spacespace
Joined: November 26, 2011
Location: Egypt
Posted: March 10, 2013 at 10:51 AM / IP Logged  
You mean like in the photo?
viper 5902 + dball in hyundai 2012 - Page 12 -- posted image.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 10, 2013 at 11:03 AM / IP Logged  
Yes, place the diode below your connection with the band towards the brake light, it will block any feedback from the brake lights.
tameros 
Copper - Posts: 75
Copper spacespace
Joined: November 26, 2011
Location: Egypt
Posted: March 10, 2013 at 11:43 AM / IP Logged  
OK got it
tameros 
Copper - Posts: 75
Copper spacespace
Joined: November 26, 2011
Location: Egypt
Posted: March 12, 2013 at 9:09 AM / IP Logged  
Hii Howard
I tested the wire going to the back giving me 12 VDC when i depress the brake and cut it, then before installing the diode tested the remote start while it is cut. First time the R/S worked well, but when i deactivated the remote start and tried again it gave me again "Brake ON" then the second time the same and whenever i try after it gave "Brake ON"
So i don't think it is the spoiler led problem, so what do u think it can be?
Page of 14

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, September 21, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer