Viper 5101 with DBALL2 for 2012 Tundra

Home / the12volt's Install Bay / Car Security and Convenience / Viper 5101 with DBALL2 for 2012 Tundra

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: March 05, 2016 at 4:25 PM / IP Logged

Where did the GREEN/ black and GREEN / WHITE wires come from

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

mountaineer83

Member - Posts: 12

Joined: February 12, 2016

Location: West Virginia, United States

Posted: March 05, 2016 at 5:03 PM / IP Logged

They are from the white 18 pin harness on the Remote Start unit (viper 5101). After I went back and looked at the install diagrams on the directechs website it made sense.

Once I wired it this way it worked first time.

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.