viper 5902 + dball in hyundai 2012

Home / the12volt's Install Bay / Car Security and Convenience / viper 5902 + dball in hyundai 2012 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 01, 2013 at 5:30 PM / IP Logged

Try pressing the LOCK on your factory remote at this stage.

Otherwise read the page marked LED diagnostics and trouble shooting.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 01, 2013 at 5:33 PM / IP Logged

I honestly don't know except the only thing different would be the immobiliser, where's it made, Korea, Turkey or Hungary?

tameros

Copper - Posts: 75

Joined: November 26, 2011

Location: Egypt

Posted: March 01, 2013 at 5:34 PM / IP Logged

when i press my lock of OEM it turns from Red to off and the car locks, if the door is open and i do this it turns from blinking red to solid red

tameros

Copper - Posts: 75

Joined: November 26, 2011

Location: Egypt

Posted: March 01, 2013 at 5:35 PM / IP Logged

i have smart key not normal key

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 01, 2013 at 5:39 PM / IP Logged

Aren't there specific instructions for smart key programming?

Sorry can't help you more right now, I'm not a youngster like you, it's 11:30 pm here and I have a 7:00 am on an nasty Audi TT.

tameros

Copper - Posts: 75

Joined: November 26, 2011

Location: Egypt

Posted: March 01, 2013 at 5:44 PM / IP Logged

Goodnight then and hear from you tomorrow

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 01, 2013 at 6:12 PM / IP Logged

I'll be working during the day but I'll have a look at the instructions tomorrow in the afternoon.

tameros

Copper - Posts: 75

Joined: November 26, 2011

Location: Egypt

Posted: March 02, 2013 at 4:28 AM / IP Logged

I found the problem. cable to CAN high was switched with CAN low, i fixed it and the DBALL module identified the car

When i remote start the car runs for like 10 seconds then turns off, then tries to run and runs for ten seconds and off, then tells me on the R/S remote that brake ON

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: March 02, 2013 at 8:44 AM / IP Logged

Without going back through the thread, did you ever connect the tach wire? If so, did it test correctly before connecting it?

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

tameros

Copper - Posts: 75

Joined: November 26, 2011

Location: Egypt

Posted: March 02, 2013 at 12:39 PM / IP Logged

how should i test it?

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.